Stove & Oven Repair

stove repair bryan

(979) 232-8304

You cannot cook with a broken oven or stove. You should schedule stove repair ASAP or there will not be time to whip up a nutritious dinner. We don’t want everyone in your family to go hungry! That’s the reason we are proud to offer same-day appointments for oven and stove repair in Bryan, TX.

Triumph Appliance Repair is able to fix all oven, range and stove problems on name brands and models. Our repairmen have the experience, tools and training to finish the service during their original visit. We load up service vans with replacement parts for top appliance brands and offer a warranty on labor. It’s our hope to repair your broken oven in enough time for dinner!



If an electric stove won’t turn on, first be sure the appliance is plugged in and all circuit breakers are switched on. You should check the pilot light on gas models. If the stove is plugged in and the pilot light is lit in the oven, that means a different part will have to be repaired. The reason for the issue might be an infinite switch, surface element, burner igniter or bake and broil element.


A stove or burner or oven that doesn’t heat will not do much. An oven does not heat when there is a broken bake element or oven sensor. Your burner does not turn on if an element breaks or when the burner switch or terminal block do not work. We know how to repair these common issues in no more than 1-2 hours after we arrive.


It is reasonable to assume the control panel on a stove or oven is broken when the timer or program settings do not work. In this case, we know how to replace control boards on Sears, GE, LG, Kenmore, KitchenAid and most other brands and models of ranges, stoves and ovens. We provide a warranty on all of the control panels and manufacturer replacement parts we need for this oven repair service.


You should have a hot oven. Although not too hot! If the oven heat is out of control, it could be because of a broken sensor or thermostat. Our technicians can identify the location of the issue and then repair it. Always be careful if troubleshooting this problem for fear of burns from the very high and totally unpredictable heat.


A common stove issue is times where an igniter glows but it doesn’t light. The reason this occurs is sometimes from either a broken {surface igniter, safety valve, electronic control|electronic control, surface igniter, safety valve|safety valve, electronic control, surface igniter| or sensor. We can determine if we are able to fix these appliance parts or if we will have to replace the parts.


New self-cleaning models of ovens are known to have door issues. The door does not open after the cleaning cycle. We monitor the door closure, thermostat and seal to identify why the door won’t open up and then we complete the repair in order to fix the issue.